24 port UTP CAT6 patch panel , Empty Cable patch panel with cable rack tray
 
Quick Detail:
1.Type:Category 6  UTP
2.Color:black
 3.IDC build -in times ≥250,RJ45 socket plug-pull times ≥750
4.Contact: PC UL94V-0, 0.45mm(0.018")
5.3 u" Gold plating on contact area
6.Fit for 22-26AWG (0.4-0.65mm) and 5.2inch(1.27mm) cables
 
Description:
 

1. 24ports patch panel, Cat.6 UTP type. The structure of each port of this patch panel is same which makes sure that the performance of each port is consistent.

2. IDC: 110 type.

3.Connecting:  IDC for horizontal distribution cables.

4. The cable management is combined in this patch panel. All kinds of cables with different dimensions can be fixed on the patch panel.

5. According to the standard of ISO/IEC 11801:2000 CLASS E and ANSI/TIA/EIA/568B.2-1 Cat.6 standard. T568A punching sequence and T568B punching sequence are both compatible. Fitting for horizontal distribution in the equipments

room and equipments connecting.
6. Compatibility: Compatible for UTP Cat.6 or Cat.5e, Cat.5 general cable distribution systems.
 
 
Electrical:
Angle:90,180 Degree
Current rating: 1.5 Amp Max.
Voltage rating: 150 Volts
Contact resistance: 20 m-ohm
Insulation Resistance: 500M-ohm
Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min
 
 
 
Specifications:
 
Meet TIA/EIA-568-A and TIA/EIA-568-B Category 6A requirements.
Meet TIA/EIA TSB-40
Meet ISO/IEC Generic Cabling Standard 11801
Meet CENELEC Generic Cabling Standard EN50173

 
 
Applications: 
 
 Mainly applied to connect equipment or distribution lines,finishing the trunk line distribution and terminal equipment connection. 
Using the back bulid-in block to distribution lines vertically or horizontally,and through the front RJ45 jack to connect the teminal of working area to the network enchanger.

Shipping and delivery time: